High Strength Copper Pipes And Tubes For CCM High Thermal - Conductivity Optional Mould
Detailed Product Description
| Type: |
Square Billet Round Billet Rectangular Billet |
Material 1: |
E-Cu, |
| Application: |
CCM |
Origin: |
China |
| Material 2: |
SF-Cu (DHP Cu) |
Material 3: |
CuAg, Cu-Cr-Zr |
| High Light: |
copper tube pipe, copper pipes and tubes |
Copper mould tube for CCM casting spare parts quadruplicate tapers
- Situated in a critical position of continuous casting machine, copper mould requires extreme high thermal-conductivity and high strength. The molten steel will be formed into a certain shaped steel billets immediately after it passes through the copper mould.
- Besides basic function of shaping and solidifying the steel strand, copper mould is of great influence on the economics of continuous casting lines.
- Not only the cost, the service life of copper mould and the quality of the cast product are also considered as important factors by the users.
- Therefore, suitable mould design as well as study of continuous casters and working conditions is making stringent demands on the manufacturers.
- BEIJING SINO EQUIPMENT Mould Factory is one of the leading manufacturers of the copper mould in China. With more than twenty years experience and through adopting advanced German technology, BEIJING SINO EQUIPMENT copper mould has been winning acceptance from the users worldwide.
- Our specialized know-how, quality control and service enable us to satisfy the market’s changing requirements. Concentrating on adaptability to the improvement of continuous casting technology with continuously ongoing research and development word, BEIJING SINO EQUIPMENT is providing optimal solutions to your moulds.
| Material | Chemical Composition | Mechanical Properties | Electric Conductivity (%IACS) |
Cu
(%) | Others
(%) | Tensile Strength σ b (N/mm2) | Yield Strength σ 0.2 (N/mm2) | Elongation
δ
(%) | Hardness (HB) |
| E-Cu | ＞99.90 | | 200 | 40 | 40 | 45 | 98 |
| SF-Cu | ＞99.85 | P0.015-0.040 | 240-310 | 190-250 | 25-10 | 80-95 | 85 |
| CuAg | ＞99.50 | Ag0.08-0.12 | 240-310 | 200-225 | 16-10 | 110-125 | 95 |
| Cu-Cr-Zr | ＞98.0 | Cr0.3-1.2
Zr0.08-0.3 | 375-445 | 280-355 | 20-13 | 115-130 | 80 |
Product Scope:
| Material | E-Cu, SF-Cu (DHP Cu), CuAg, Cu-Cr-Zr |
| Design | Square, rectangular, round , plate, H beam |
| Straight or curved |
| Outer contour parallel |
| Internal geometries: parallel, single tapered, double tapered, multi-tapered, parabolic tapered, convex tapered |
| Size | Square: □ 80mm~500mm
Arc Radius: 4000-17000mm
Wall thickness:6-50mm
Length: 700-1000mm
Rectangular: 100-500mm×650mm
Arc Radius: 4000-17000mm
Wall thickness:6-50mm
Length: 700-1000mm
Round: Ф110-Ф1200mm
Arc Radius: 5000-17000mm
Wall thickness:10-50mm
Length: 700-1000mm
H-beam: Intergrated stype
Arc Radius: 6000-17000mm
Wall thickness:12-50mm
Length: 780-1016mm
|
| Coating | Coating material: Cr, Ni-Cr, Ni-Fe or Ni-co |
| No. | Length
(mm) | Section
Dimension
(mm) | Curved
Radius
(mm) | Wall
Thickness
(mm) | Outer
Corner
Radius
(mm) | Inner
Corner
Radius
(mm) | Cr-Coating
Thickness
(mm) |
| 1 | 700 | □80×80 | 7000 | 10 | 16 | 6 | 0.13 |
| 2 | 812 | □90×90 | 7000 | 10 | 16 | 6 | 0.13 |
| 3 | 700 | □90×90 | 5250 | 10 | 18 | 8 | 0.06~0.08 |
| 4 | 700 | □100×100 | 6000 | 10 | 18 | 8 | 0.06~0.08 |
| 5 | 750 | □100×100 | 6000 | 10 | 16 | 6 | 0.06~0.08 |
| 6 | 812 | □100×100 | 4000 | 11 | 17 | 5 | 0.07~0.09 |
| 7 | 801 | □101×101 | 4000 | 6 | 12 | 6 | 0.10 |
| 8 | 780 | □110×110 | 5000 | 8 | 16 | 8 | 0.06~0.08 |
| 9 | 801 | □110×110 | 6000 | 8 | 14 | 6 | 0.06~0.08 |
| 10 | 887.2 | □110×110 | 6000 | 9.5 | 12.5 | 3 | 0.075 |
